DIMENSIONAL DRAWING — 559F240,300
NOTES:
1. Dimensions in (
) are in millimeters.
2.
Center of gravity.
3.
Direction of airflow.
4. Ductwork to be attached to accessory roof curb or adapter
only.
5. For units with electric heat, a field-supplied 90° elbow must
be installed in the supply ductwork below the unit discharge
connection.
6. Minimum clearance:
a. Rear: 7
8
-0
9
(2134) for coil removal. This dimension can
be reduced to 4
8
-0
9
(1219) if conditions permit coil re-
moval from the top.
b. Left side: 4
8
-0
9
(1219) for proper condenser coil airflow.
c. Front: 4
8
-0
9
(1219) for control box access.
d. Right side: 4
8
-0
9
(1219) for proper operation of damper
and power exhaust if so equipped.
e. Top: 6
8
-0
9
(1829) to assure proper condenser fan
operation.
f. Local codes or jurisdiction may prevail.
7. With the exception of clearance for the condenser coil and
the damper/power exhaust as stated in note no. 6, remov-
able fence or barricade requires no clearance.
8. Dimensions are from outside of corner post. Allow 0
8
-
5
⁄
16
9
(8)
on each side for top panel drip edge.
UNIT
559F
CORNER WEIGHT*
A
B
C
D
Lb
Kg
Lb
Kg
Lb
Kg
Lb
Kg
240
497
225
470
213
461
209
672
305
300
513
233
532
241
542
246
563
255
*Weights are for unit only and do not include options or crating.
UNIT
559F
DIMENSIONS
X
Y
Ft-in.
mm
Ft-in.
mm
240
3-7
1092
3-2
965
300
3-5
1035
3-7
1092
9
