Brusa NLG513, Technical Data And Start-Up

Page: 11 / 71

11
Technical data
and start-up
NLG5 charger
3.3.3 Safety Instructions for Handling and Operation
INSTRUCTION
Damage to the HV Battery:

Before the start of the first charging process ensure that the charging profile of the device is
compatible with your HV battery!

You must make sure that the voltage ranges of the device and the HV battery are identical!

Only use compatible and high-quality cabling! For this we recommend our specially configured
original BRUSA mains and charging cables.
INSTRUCTION
Damage to the Charger:

Check while connecting the device that the mains voltage is within the permitted range (see
chapter 6.1 Technical Data )!

A high cooling water temperature or ambient temperature reduces the life span! So take ongoing
care to ensure sufficient cooling of the device!

Do not place the device in direct sunlight and in close proximity to heat sources!

Although if the device has high IP protection, you should avoid placing it in direct contact with
water (rain, spurting water) if possible!

Under no circumstances should you put a low-resistance connection between the HV contacts,
the housing contacts and the LV contacts! This will lead to malfunctions and furthermore to the
destruction of the device!

Prevent any penetration of fluids into the device (e.g. during assembly work)! The penetration of
fluids will lead to a short circuit and subsequent damage to the device!

Under no circumstances should you operate the device if liquid is leaking in anywhere, contact
BRUSA Elektronik AG immediately!