51
Technical data
and start-up
NLG5 charger
PROCEDURE STEP
ILLUSTRATION / OTHER INFORMATION
9.
In the
Connection
menu, press
Connect with
NLG
(1).
The connection to the charger is being
established. When the connection is active,
the report
Connected with device
will appear
in the field (2).
Check the cable connections in case the
connection cannot be established and repeat
the procedure.
10.
In the
Profiles
menu, press
Send to NLG
(1).
The charging profile is sent to the NLG.
11.
In the
Connection
menu, press
Disconnect
(1).
The connection to the charger is now
disconnected. When the connection is
inactive, the report
Not connected with device
appears in the field (2).
12.
End the ChargeStar software.
---
13.
Switch pin 2
AUX
to low or disconnect the unit from
the external 12 V supply.
The charger has been switched off.
---
