37
Technical data
and start-up
NLG5 charger
6.9
Dimensions and Installation Information
For the installation of the charger, the following points must be strictly adhered to:
Despite the IP protection provided, the charger should be installed in a dry location, protected from splashing
water.
The air-cooled version must be installed so that a constant fresh air supply is guaranteed. This has a direct
influence on the power of the device (derating).
The mechanical fixings must be arranged so that the device is fitted firmly and in a way that is as vibration-
proof as possible.
The cable feeds and cooling water pipes should have
sufficient space
for manoeuvre and may under no
circumstances sit in contact with sharp-edged components.
6.9.1
Fixing Points
1.
M6 through hole (thread depth 24 mm)
Min. screw-in depth = 20 mm
Torque = 10 Nm
