Brusa NLG513 Technical Data And Start-Up Download Page 50

Page: 50 / 71

Technical data

and start-up

NLG5 charger

7.2

Configuring the Charger / Assigning Charging Profiles

INFORMATION

The provided ChargeStar software functions using the following operating systems with 32

bit

processors:



Win2000



Win XP



Win Vista

PROCEDURE STEP

ILLUSTRATION / OTHER INFORMATION

Ensure that all mechanical and electrical
connections are connected with the charger.

---

Connect the charger with your PC (RS232 interface).

See chapter

6.8.4.8 Pin 11 TXD, Pin 12 RXD

---

Switch pin 2

AUX

high

connect the device to an

external 12 V supply.

---

Make the connection to the charger. Then check the
operational data of the charger.

See chapter

8.1.1 Retrieving / Monitoring

Operating Data from the Charger

---

Install the provided

ChargeStar

software.

---

Start the

ChargeStar

software.

Choose the desired mode of operation (1).

See chapter

6.13 Modes of Operation

Choose the suitable charging profile for your battery.

See chapter

8.2.1 Loading Charging Profiles

from the Database

See chapter

8.2.2 Programming New

Charging Profiles

---

Summary of Contents for NLG513








































































Search results

Summary of Contents for NLG513

Reviews:

Related manuals for NLG513

Brands by name

Popular brands

Brusa NLG513, Technical Data And Start-Up

Search results

Summary of Contents for NLG513

Reviews:

Related manuals for NLG513

Brands by name

Popular brands