27
©2011,2005 BRUNO INDEPENDENT LIVING AIDS, INC.®
SRE-2750 INSTALL 05-17-2011
Changing the PCB Diagnostic Mode
1. Turn the circuit breaker on the carriage to `OFF’.
2. Remove the left carriage cover.
3. The unit is shipped in the Multi-User Diagnostic Mode. Changes are made via the Number 1 and
Number 2 positions on the 4-Ganged DIP Switch.
4-GANGED DIP SWITCH
Chirp
0.25 seconds
Short Beep
0.50 seconds
Long Beep
1.50 seconds
Pause
1.00 second
DIP SWITCH POSITION
DIAGNOSTIC MODE #1
#2
Multi-User OFF OFF
Single-User OFF ON
Quiet
ON OFF
Battery Warnings Only
ON ON
AUDIO REFERENCE
NOTICE:
Before touching anything inside the carriage
assembly, ground yourself by touching an unpainted metal
surface on the unit such as an exposed bolt, or one of the
mounting screws on the electrical panel. While you work,
periodically touch an unpainted metal surface to dissipate
any static electricity that could harm internal components.
CIRCUIT BOARD DIAGNOSTICS
ELECTRICAL
