©2011,2005 BRUNO INDEPENDENT LIVING AIDS, INC.®
SRE-2750 INSTALL 05-17-2011
6
CARTON CONTENTS and TOOLS
The
ELECTRA-RIDE™ LT
is shipped in (5) cartons. Check the contents of the cartons to be sure
you have all of the components before beginning an installation.
Check the carton contents for shipping damage upon receipt.
Damage claims must be filed by the
dealer,
not the manufacturer. Bruno Independent Living Aids,
Inc.® cannot be responsible for shipping damage.
CARRIAGE BOX
(1) complete carriage assembly including footrest
(1) battery charger
(1)
SRE-K-1518 battery charger hardware kit
(2) IR transmitters
(2) transmitter mounting brackets
(2)
SRE-K-2701 transmitter mounting hardware kit
(2) pieces of Velcro®
INSTALLATION AND SEAT BOX
(1) complete seat assembly
INSTALLATION PARTS BOX
Parts Box A (see box label for contents)
Parts Box B (see box label for contents)
RAIL BOX (left side)
RAIL BOX (right side)
FOR A FASTER,
SMOOTHER
INSTALLATION:
Be sure you have all
necessary parts and
tools before traveling
to the
installation site.
Tools
• Snap ring pliers
• Protractor level, builder's level
• Socket set, metric (10 mm through 19 mm)
• Ratchet, with 6" extension
• Allen wrench set, metric
• Combination wrench set, metric (10 mm through 19 mm)
• Torque wrench (one that handles 50-80 ft.lb./68-108 Nm)
• Phillips screwdrivers
• 3/8" socket (clamp screws)
• 9/16" and 5/8" open-end wrench (limit switch adjustment)
• 5/16" open-end wrench
• Drill with and 1/8", 5/16" and 1/2" bits
• Hacksaw with 2 or 3 blades, or metal cutting bandsaw
• 20' tape measure
• C-clamp
•
*Highly recommended*
: Bruno Joint Plate Mounting Clamp
(P/N FIX-00525, available from Bruno)
• Wire stripper and crimper
• Flashlight
• Needle-nose pliers
• Scissors or knife
• Extension cord
• File
• 12" adjustable wrench
• 90-degree needle-nose pliers
• Vise-Grip
®
Vise-Grip
®
is a registered trademark of the IRWIN Industrial Tool Company.
