19
©2011,2005 BRUNO INDEPENDENT LIVING AIDS, INC.®
SRE-2750 INSTALL 05-17-2011
INSTALLING THE SEAT ASSEMBLY
1. Remove the seat assembly from the shipping package.
2. Remove the snap ring from the pivot tube.
3.
SAVE THE SNAP RING!
NOTE: The seat post covers are still removed from the unit
at this stage.
4. Slide the seat post tube into the bushing.
5. Remove the (2) screws securing the seat channel
cover. See left
6. Route the harnesses down through the pivot tube, one
at a time.
7. Remove the carriage jumper. Keep it with the carriage
by sliding it over the harness. See left.
8. Remount the snap ring on the pivot tube.
9. Connect the seat switch and rocker switch.
10. Remount the seat channel cover.
11. Remount the seat post front covers using the (2)
Phillips head screws and bumpers.
INSTALLATION
