Bruno Curb-Sider VSL-6000 Operator'S Manual Download

Page: 2 / 24

©BRUNO

VSL-6000/6900UK Operator’s 04/16/201

Thank you for purchasing a Bruno VSL-6000/6900 Curb-Sider® lift..

The information contained in this manual is provided with your safety in mind. Please read and
follow the instructions to ensure safe and trouble-free operation.

Throughout this manual,

safety precautions

are provided to identify potentially hazardous situations and to

advise how to avoid them.

WARNING:

Indicates a potentially hazardous situation that, if not avoided, could cause serious

bodily injury and/or property damage.

CAUTION:

Indicates a potentially hazardous situation that, if not avoided, could cause damage

to the lift, vehicle and/or moderate injury.

CAUTION:

Indicates a potentially hazardous electrical situation that, if not avoided, could cause

damage to the lift, vehicle and/or moderate injury.

NOTE:

Directions that make it easier to install or operate the lift.

Authorized EU Agent:

ASCIER SAS

11-13 Rue Charles Cordier

ZA Parc de Bel Air

77164 Ferrières-en-Brie

FRANCE

Authorized UK Agent:

BRUNO UK LTD.

Unit 5, Millennium Court

Clayhill Industrial Park

Neston, Wirral CH64 3UZ

UNITED KINGDOM

Summary of Contents for Curb-Sider VSL-6000

























Search results

Summary of Contents for Curb-Sider VSL-6000

Reviews:

Related manuals for Curb-Sider VSL-6000

Brands by name

Popular brands

Bruno Curb-Sider VSL-6000, Operator'S Manual

Search results

Summary of Contents for Curb-Sider VSL-6000

Reviews:

Related manuals for Curb-Sider VSL-6000

Brands by name

Popular brands