Bruno Curb-Sider VSL-6000, Operator'S Manual

Page: 15 / 24

15
©BRUNO
VSL-6000/6900UK Operator’s 04/16/2019
STEP 7.3
• Depress and hold the RETRACT button on the
control pendant while guiding the mobility
device with your hand.
• Release the RETRACT button when the mobility
device is over the desired location.
• Depress and hold the IN button to rotate the
mobility device into the vehicle, while guiding the
mobility device with your hand.
• Release the IN button when the mobility device
is over the desired position.
• Depress and hold the DOWN button to lower
the mobility device to the vehicle floor.
• Release the DOWN button when the mobility
device comes to rest on the vehicle floor.
STEP 7.4
• Be sure that:
- the mobility device rests firmly on as level an
area as possible;
- the pick-up device remains attached to the
mobility device, and
- the lift belt remains taut.
• SET THE MOBILITY DEVICE’S PARKING
BRAKE and turn off the unit.
• Place the control pendant and its cord in a se-
cure location in the vehicle.
NOTE: Make sure the pendant is placed where
nothing will come to rest on the buttons.
• Check that no obstacles stand in the way of
closing the vehicle rear door or tailgate.
• Close the vehicle rear door or tailgate.