background image

5

 

©BRUNO

VSL-6000/6900UK Operator’s  04/16/2019

2.0 PRODUCT REGISTRATION FORM

We are pleased to provide you with this mobility-
enhancing product.

The Product Registration Form is shipped in a 
plastic bag with this manual. It is very important 
that you fill out and return this form at your 
earliest convenience so that we may complete the 
warranty registration process for your unit.

The 

serial number

 is found on labels affixed to the 

manual, as well as on the unit itself.

Serial and model numbers

 must be provided 

when filing a warranty claim, requesting service 
or ordering parts. We encourage you to keep this 
information readily available at all times.

Best wishes.

Product Registration Form

Please print in 

CAPITAL

 letters

.

*

First Name ______________________________________________________ M.I._____

*

Last Name _______________________________________________________________

*

Street Address ________________________________________________ Apt. No._____

*

City _____________________________________________

*

State/Province _________ 

*

Zip/Postal Code ___________________________________________________________

Email Address  _____________________________________________________________

Telephone No.  _____________________________________________________________

Date of Purchase (mm/dd/yy) _________________________________________________

Dealer: Locate the Model No. and Serial 

No. decal on the decal sheet 

shipped with the unit and 

place it here.

End-User: For faster registration, 

please go to the website 

shown above.

Model No.___________

*

Serial No._________________

Please be assured that Bruno 

does not

 share or sell the information you provide.

©2013,2005 Bruno Independent Living Aids, Inc.®

Please rate your satisfaction with your Bruno 

dealer

:

excellent 

good 

average 

poor

Please rate your satisfaction with your Bruno 

product

:

excellent 

good 

average 

poor

Bruno reserves the right to use information indicated on this form in its online, video, audio and printed 

materials. Names will be abbreviated to ensure the privacy and anonymity of the individual.

Online registration available at http://www.bruno.com/warranty.html

P/N PROD REG STD

Rev. 02-18-2013

* = 

SA

MP

LE

Summary of Contents for Curb-Sider VSL-6000

























Reviews: