Bruno Curb-Sider VSL-6000, Operator'S Manual

Page: 11 / 24

11
©BRUNO
VSL-6000/6900UK Operator’s 04/16/2019
STEP 5.4
• Depress and hold the pendant IN switch to
swing the mobility device into the vehicle
NOTE: Guide the mobility device with your hand
as it swings into the vehicle. Apply gentle
pressure on the mobility device body or
seat.
• Release the IN switch when the scooter is
suspended over the desired location.
• Depress and hold the DOWN switch on the
control pendant.
• Release the switch when the scooter comes to
rest on the vehicle floor.
• Be sure that:
- the scooter rests firmly on as level an area as
possible;
- the C-arm/pickup claw remains attached to
the mobility device, and
- the lift belt remains taut.
STEP 5.5
• SET THE MOBILITY DEVICE’S PARKING
BRAKE and turn off the unit.
• Place the control pendant and its cord in a
secure location in the vehicle.
NOTE:
Make suret the pendant is placed where
nothing will come to rest on the buttons.
• Check that no obstacles stand in the way of
closing the vehicle door.
• Close the vehicle door.