Ikan PT15-TM Quick Start Manual Download Page 1 | Manualshive

Page: 1 / 16

background image

www.ikancorp.com | 1.713.272.8822 | [email protected]

PT4500-TM-PEDESTAL

15” Teleprompter, Pedestal & Dolly Turnkey w/ Talent Monitor

Quick Start Guide

OVERVIEW

Ikan’s Turnkey Broadcast Solutions include everything you need for your professional camera & teleprompting setup. This solution includes a
15” teleprompter w/ talent monitor, pedestal, and dolly. All of our systems have been tested internally for payload compatibility.

The remaining payload capacity, after mounting the full 15” teleprompter system without the counterweight, can accommodate camera setups
up to 13 lbs. The pedestal, without the teleprompter system, can accommodate cameras up to 35.8 lbs. This solution also includes a carrying
bag for the dolly.

1
2
3
...
»

Summary of Contents for PT15-TM

















Reviews:

No comments

Related manuals for PT15-TM

Brand: Xplova Pages: 13

projectorsleeve

Brand: 3M Pages: 14

Brand: 3LeggedThing Pages: 9

Brand: VEAP SHIELD UNITED Pages: 3

Brand: Hagan Pages: 32

Brand: paramondo Pages: 44

Brand: Warrior Winches Pages: 17

QuadraTop Adventure Top S

Brand: Quadratec Pages: 20

Brand: Yakima Pages: 6

Brand: Yakima Pages: 18

Brand: Yakima Pages: 18

Brand: Compass Pages: 16

Genuine Bindicator VRF-1000 Series

Brand: Venture Measurement Pages: 2

Brand: Pyle Pages: 4

Brand: ZEN AROME Pages: 29

Brand: UNITED Pages: 4

Brand: Thule Pages: 2

Brand: NavLinkz Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands