manualshive.com logo in svg

Bruker minispec mq20, User Manual, Page: 8 / 86

Share
Download
Bruker minispec mq20 User Manual Download Page 8

About This Manual

8

E1400912_1_001

 WARNING

WARNING indicates a hazardous situation, which, if not avoided, could result
in death or serious injury.

This is the consequence of not following the warning.

1. This is the safety condition.

u

This is the safety instruction.

 CAUTION

CAUTION indicates a hazardous situation, which, if not avoided, may result in
minor or moderate injury or severe material or property damage.

This is the consequence of not following the warning.

1. This is the safety condition.

u

This is the safety instruction.

NOTICE

NOTICE indicates a property damage message.

This is the consequence of not following the notice.

1. This is a safety condition.

u

This is a safety instruction.

SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS are used for control flow and shutdowns in the event
of an error or emergency.

This is the consequence of not following the safety instructions.

1. This is a safety condition.

u

This is a safety instruction.

This symbol highlights useful tips and recommendations as well as
information designed to ensure efficient and smooth operation.

Summary of Contents for minispec mq20























































































Reviews:

No comments