Bruker minispec mq20, User Manual, Page: 16 / 86

Transport, Packaging and Storage
16 E1400912_1_001
Do not Damage Air-tight
Packaging The packaging is air-tight. Damage to the
barrier layer may render the contents
unusable.
Do not pierce.
Do not use sharp objects to open.
Component Sensitive to
Electrostatic Charge The packaging contains components which
are sensitive to an electrostatic charge.
Only allow packaging to be opened by trained
personnel.
Establish potential equalisation before
opening.
Protect from Heat Protect packages against heat and direct
sunlight.
Protect from Heat and
Radioactive Sources Protect packages against heat, direct sunlight
and radioactive sources.
Table 3.1: Symbols on the Packaging
3.2 Inspection at Delivery
Upon receipt, immediately inspect the delivery for completeness and transport damage.
Proceed as follows in the event of externally apparent transport damage:
• Do not accept the delivery, or only accept it subject to reservation.
• Note the extent of the damage on the transport documentation or the shipper's delivery
note.
• Initiate complaint procedures.
Note: Issue a complaint in respect to each defect immediately following detection. Damage
compensation claims can only be asserted within the applicable complaint deadlines.