manualshive.com logo in svg

Bruker minispec mq20, User Manual, Page: 23 / 86

Share
Download
Bruker minispec mq20 User Manual Download Page 23

Introduction

E1400912_1_001

23

5

Introduction

The minispec mq20 Toothpaste Analyzer is a benchtop Nuclear Magnetic Resonance (NMR)
analyzer for detection of fluorine (

19

F).

This manual provides instructions on proper installation of the minispec and an introduction to
the use of the minispec hardware and software. Topics covered include:

• Installation of hardware (section Installation of the minispec mq-Series).

• Installation of software for Windows

TM

 7 32-bit/64-bit if needed (section 

Software

Installation [

}

 31]

).

• Software configuration, if needed. Analyzers typically are equipped with PC systems and

pre-installed software.

• Proper operation of the system by using minispec Plus software, the GUI for the mq20

Toothpaste Analyzer (calibration, measurement, result, administration, etc.).

• Using minispec.exe software, the minispec software used for diagnostic and service

purposes.

• The software functions are discussed step by step, using pictures to help familiarize the

user with all of the accessible minispec features.

• Finally, for a better understanding of the principles involved, an introduction to the basics

of NMR is provided in the section 

Basic NMR Principles [

}

 73]

.

Figure 5.1: The minispec mq20 Toothpaste Analyzer

The  minispec  software  package 

minispec  Plus

  is  the  main  software  running  on  the  mq20

Toothpaste  Analyzer  systems  and  is  described  in  this  manual.  Software  operation  is
explained in detail in the following manuals, which are available on the minispec software CD/
memory stick:

• minispec Plus Administration

• minispec Plus Classic

• minispec Plus Chemometrics

• minispec Plus NoCalibration

Summary of Contents for minispec mq20























































































Reviews:

No comments