BRP ski-doo REV GEN4 TOURING ACE Operator'S Manual Download

Page: 75 / 340

SAFETY INFORMATION

Prre

e--R

Riid

e C

ecckk L

Liisstt

ITEM

OPERATION

✔

BODY INCLUDING
SEAT, FOOTRESTS,
LIGHTS, AIR FILTER,
CONTROLS AND
INSTRUMENTS

Check condition and remove snow or
ice.

SKIS AND STEERING
ACTION

Check for free movement and proper
operation.

SKI RUNNERS

Check for proper operation.

FUEL

Check for proper level and no leaks.

INJECTION OIL (IF
APPLICABLE)

Check for proper level and no leaks.

COOLANT

Check for proper level and no leaks.

DRIVE BELT

Check for cracks, fraying or abnormal
wear and proper height.

THROTTLE LEVER

Check for proper operation.

BRAKE LEVER

Check for proper operation.

PARKING BRAKE,
BRAKE

Check for proper operation.

BRAKE FLUID

Check for proper level and no leaks.

STORAGE
COMPARTMENT

Check for proper latching and no
heavy or breakable objects.

TRACK

Check condition and remove snow or
ice.
For studded tracks, refer to

Traction

Enhancing Products

SLIDER SHOES

Check for proper operation.

EMERGENCY ENGINE
STOP SWITCH AND
ENGINE CUT-OFF

Check for proper action. Tether cord
must be attached to operator clothing
eyelet.

PRE-RIDE INSPECTION

Summary of Contents for ski-doo REV GEN4 TOURING ACE





















































































































































































































































































































































Search results

Summary of Contents for ski-doo REV GEN4 TOURING ACE

Reviews:

Related manuals for ski-doo REV GEN4 TOURING ACE

Brands by name

Popular brands

BRP ski-doo REV GEN4 TOURING ACE, Operator'S Manual

Search results

Summary of Contents for ski-doo REV GEN4 TOURING ACE

Reviews:

Related manuals for ski-doo REV GEN4 TOURING ACE

Brands by name

Popular brands