BRP I-Command Evinrude Etec Series, User Manual

Page: 13 / 113

11
Device Net-style Connectors
I-Command and NMEA 2000 networks use DeviceNet Micro-C type connec-
tors. These connectors use 12 mm threaded locking rings and are water-
proof when assembled properly. All
DeviceNet Micro-C connectors are
compatible with the I-Command red network connectors.
Connectors with slighty different appearances supplied with I-Command or
NMEA 2000 devices should NOT affect network operation. Always check
pin and socket and locking ring configurations when installing connectors on
a network.
Use the I-Command Product Guide , P/N 764677, or a current Accessories
Parts Catalog (2008 or newer) to look up part numbers for I-Command net-
work connectors. See your dealer.
Connector Installation
Connectors have two configurations – Male (pins) and Female (sockets).
Lubricate all connector gaskets with
Electrical Grease before assembly.
Connectors should assemble easily. Do not force connectors or locking
rings together.
If connectors do not match, an adapter cable may be available. See your
dealer.
I-Command Network Connectors
(DeviceNet-style Connectors)
DeviceNet Micro-C connectors offered by
other suppliers.