BRP I-Command Evinrude Etec Series User Manual Download Page 21

Page: 21 / 113

Engine Data

The

I-Command

system can monitor up to three engines. The ENGINE DATA option controls which engine is

monitored.

Note:

This option will only display in multi-engine set-ups.

1. Press MENU. Use the UP or DOWN buttons and select SYSTEM SETUP.

Press ENTER.

2. Use the UP or DOWN buttons and select ENGINE DATA.

Press ENTER.

3. Use the UP or DOWN buttons to select choose PORT, CENTER, OR STARBOARD engine.

Press ENTER.

Repeat this process to assign each engine to its own gauge.

M E N U

DOWN

EXIT

GES

ENTER

Customize

Pages

Screen

Audio Setup

System Setup

M E N U

DOWN

EXIT

GES

ENTER

Engines

Port

Center

Stbd

M E N U

DOWN

EXIT

GES

ENTER

Fuel Setup

Engine Data

Speed Range

Press Ranges

Eng Warnings

Change Units

Summary of Contents for I-Command Evinrude Etec Series


















































































































Search results

Summary of Contents for I-Command Evinrude Etec Series

Reviews:

Related manuals for I-Command Evinrude Etec Series

Brands by name

Popular brands

BRP I-Command Evinrude Etec Series, User Manual

Search results

Summary of Contents for I-Command Evinrude Etec Series

Reviews:

Related manuals for I-Command Evinrude Etec Series

Brands by name

Popular brands