BRP I-Command Evinrude Etec Series, User Manual

Page: 89 / 113

87
Engine Warnings
The I-Command gauges monitor engine conditions and display warnings in the event of a malfunction. Refer
to the outboard Operator’s Guide if any engine warnings are displayed.
WARNING MESSAGE
DISPLAYED
POSSIBLE CAUSE / PROCEDURE
Check Engine
A “Check Engine” condition may be activated when a critical engine con-
dition occurs, or when a service is required:
· A “Critical” condition will activate S.A.F.E. (RPM reduction) - Seek assis-
tance to return to safe harbor immediately and see your dealer.
· A minor service issue will NOT activate S.A.F.E . - See your dealer as
soon as practical.
Over Temperature
Engine or EMM above temperature range. Check cooling water to water
intakes.
Low Oil Level A low oil level has been detected in the oil tank. Fill tank.
Low System Voltage A low voltage condition has been detected. See your dealer.
Rev Limit Exceeded The RPM limit has been exceeded. Reduce throttle.
Throttle Position Sensor A throttle position sensor fault has been detected. See your dealer.
Power Reduction EMM has activated S.A.F.E .
Neutral Start Protection Attempt to start engine while in gear. Shift to neutral.
Engine Shutting Down EMM has activated engine shutdown.