BW1250
Sep. 22, 2006
Browan
Page 40 of 68
Radio Name –
specify which wireless interface of BW1250 is shown
Domain
– select the regulatory domain according to your country
The full frequency range of the 2.4 GHz or 5 GHz is not permitted for use in all countries. Depending
on your selection of regulatory domains, the available frequency channels will vary.
Before changing radio settings manually
, make sure
that your settings comply with
government regulations. At all times, it
‘s
the responsibility of the end-user to
ensure that the installation complies with local radio regulations. Refer to the
Appendix:
C)
Regulatory Domain/Channels
.
Channels
– select the channel that the access point will use to transmit and receive information. If
one channel is defined, it acts as default channel. Channels list will vary depending on selected
regulatory domain and selected band. Multiple frequency channels are used to avoid interference
between two radios of this AP, and between nearby access points. If you wish to operate more than
one access point in overlapping coverage areas, we recommend a distance of at least four channels
between the chosen channels. For example, for three Access Points in close proximity choose
channels 1, 6 and 11 for 11b/g or channels 36, 40 and 64 for 11a.
Band
– working
band
on which your radio
is
working.
Five bands are supplied: 5GHz (11a), , 2.4GHz (Mixed 11g), 2.4GHz (11g only), 2.4GHz (Mixed
11g WiFi) and 2.4GHz (11g only WiFi).
If 2.4GHz (Mixed 11g) or 2.4GHz (11g only) is selected, the radio will work on 2.4GHz for a better
performance. 2.4GHz (11g only) mode only allows 11g client access. 2.4GHz (Mixed 11g) mode
allows 11b/11g client access.
2.4GHz (Mixed 11g WiFi) or 2.4GHz (11g only WiFi) can make sure to compatible with Wi-Fi.
If 5GHz (11a) is selected, the radio will work on 5GHz 11a mode.
Only under Bridge mode, Turbo Mode 11a can be set.
Output Power
- indicates output power of the RF card in dBm, antenna gain
is not included
.
Total Output Power (EIRP) = Antenna Gain + RF card output power
The range of the EIRP varies with channel and regulatory domain.
Antenna
– show the type of Antenna.
RTS Threshold
– when set, this settings specifies the maximum packet size beyond which RTS/CTS
mechanism is be invokes. The value range of this is [0 …2347]. Default is 2347 which means that
RTS is disabled.
Enable DCA
– Enable or Disable DCA service. DCA can help to choose the best working channel
automatically. And static channel selection will be forbidden if DCA is enabled.
DCA(Dynamic Channel Allocation) solution automatically select the optimal operational frequency
channel when power up and periodically monitors the environment and adjusts for the best
operational frequency channel.
