BW1250
Sep. 22, 2006
Browan
Page 41 of 68
DCA service is available only under 2.4GHz band.
DCA threshold
– specify the value (in minutes) of DCA threshold. This threshold is been used to
judge if there is no wireless users connected during this time. And if yes, BW1250 will monitor the
environment and adjust channel for the best operational one.
If wireless network environment is stable which means auto channel selection
needn’t do frequently, set a big value for DCA threshold to gain a stable wireless
users’ connection.
If wireless network environment changes continually, frequent auto channel
selection is needed. So set a relative small value for DCA threshold to let channel
change based on wireless environment.
Wireless users will be kicked off when DCA is processing (site survey and new
operational frequency channel takes effect).
DCA optional channel
– specify the channels only in which auto channel selection (DCA) will choose
for reducing interference reference.
Only when DCA is enabled,
DCA threshold
and
DCA optional channel
will be
shown.
Layer 2 Isolation
– layer2 wireless client separation. Connected clients with user isolation function
enabled cannot access each other directly. The clients are isolated from each other using their MAC
addresses [enabled/disabled].
Mode
– two modes are supplied: AP mode and Bridge mode.
Change status or leave in the default state if no editing is necessary and click the
Save
button.
19
