Chapter 6
54
The top cover or bottom cover was
opened while the machine was cooling.
The top cover or bottom cover was
opened during printing.
Media is jammed.
Printing has stopped.
Press the cut button (
) to cut the tape, and then remove
the printed tape. After printing on fabric ribbon, use scissors
to cut it, and then remove the printed fabric ribbon. Then,
reinstall the paper core holder. For details, see
The pause button ( ) was pressed.
Printing has paused.
While printing, hold down the pause button ( ) to pause
printing. Then, you can select whether to resume or cancel
printing.
• If you selected to resume printing:
A space will be left in the printed tape or fabric ribbon,
and printing is restarted.
• If you selected to cancel printing:
To cancel printing and try again, press the cut button
(
) to cut the tape, and then remove the printed tape.
After printing on fabric ribbon, use scissors to cut it, and
then remove the printed fabric ribbon. Then, install a
new paper core onto the paper core holder before
installing it into the machine.
For details, see
Installing the Paper Core Holder
The indicators show that a system error
has occurred.
If this condition occurs, turn off the machine, and then contact
your reseller or Brother Customer Service for assistance.
I want to reduce the amount of tape that
is wound when installing the paper core.
I want to change the initial winding length.
While holding down the pause button( ), MENU/ESC button,
and power button( ), turn on the machine.
NOTE
• If you reduced the winding amount, you must remove any
slack in the tape before printing.
• If you reduced the winding amount, you will not be able to
see the test print.
To return to the previous setting, perform the same procedure
again.
Problem
Solution
Summary of Contents for TP-M5000N
Page 67: ...Printed in China LNA699001 ...