Chapter 3
38
1 Menu bar
Select a command from a list contained in a
menu. (See
2 Printer
Select the Tape Creator whose communication
settings are to be specified.
If only one Tape Creator is connected, it is
unnecessary to make a selection since only
that machine will appear.
3 Items
When [
Current Status
] is selected, the current
settings appear in the settings display/change
area.
When [
TCP/IP (Wired)
] is selected, the
settings can be changed.
4 Node Name
Displays the node name. The node name can
also be changed. (See
5 Settings Display/Change Area
Displays the current settings for the selected
item. Change the settings as necessary using
the drop-down menus, direct entry, or other
appropriate methods.
6 Refresh
Click to update the displayed settings with the
most recent information.
7 Exit
Exits [
Communication settings
], and returns
to the main window of the “
Printer Setting
Tool
”.
NOTE
Settings are not applied to machines if the
[
Exit
] button is clicked, without clicking the
[
Apply
] button after changing settings.
8 Apply
Click [
Apply
] to apply the settings to the
machine.
To save the specified settings in a command
file, select [
Save in Command File
] from the
drop-down menu.
The saved command file can be used with the
BRAdmin utility to apply the settings to a
machine.
9 Boot Method
Select [
STATIC
], [
AUTO
], [
BOOTP
], [
DHCP
]
or [
RARP
].
10 IP Address/Subnet Mask/Gateway
Specify the various values.
You can only enter settings when the IP
address is set to [
STATIC
].
11 DNS Server Method
Select [
STATIC
] or [
AUTO
].
12 Primary DNS Server IP Address/Secondary
DNS Server IP Address
You can only enter settings when the DNS
server is set to [
STATIC
].
Menu Bar
3
Select a command from a list contained in a
menu.
File Menu
3
Apply Settings to the Printer
Applies the settings to the machine.
Save Settings in Command File
Saves the specified settings in a
command file. The file extension is “.bin”.
The saved command file can be used with
the BRAdmin utility to apply the settings to
a machine.
NOTE
• The following information is not saved with
the command file.
• Node name
• IP address, subnet mask and default
gateway (when the IP address is set to
[
STATIC
])
• The saved communication settings
commands are only intended to be used
for applying settings to a machine. The
settings cannot be applied by importing
this command file.
Do not send the command file to a Tape
Creator whose model was not specified
when the command file was exported.
Summary of Contents for TP-M5000N
Page 67: ...Printed in China LNA699001 ...