STEP4 Maintenance and Troubleshooting
50
3
Turn the mark (A) on cover to mark (B) on the printer using a
coin and remove the battery cover.
When turning the battery cover, do not rotate it past the position of
mark (B)
on the printer, as this may cause a malfunction.
4
As shown below, press C part of battery and remove the battery.
By pressing C part of battery, the battery lifts up, so it can be removed easily.
5
Install the new battery, taking care to ensure the correct polarity of
the battery.
6
Refit the battery cover matching mark (A) on the cover and
mark (B) on the printer. Turn the mark (A) on the cover to
mark (D) on the printer using a coin to lock the cover.
When turning the battery cover, do not rotate it past the position of
mark (D)
on the printer, it may cause a malfunction.
7
Set the DK Roll and close the DK Roll cover.
For details, See "Installing the DK Roll" on page 16.
Summary of Contents for QL 650TD - P-Touch B/W Direct Thermal Printer
