Brother PS-300B Instruction Manual Download Page 85

Page: 85 / 164

85/164

In the toolbar, click the icon for drawing the desired shape of outline.

When the pointer is moved into the design area, its shape changes to the one corresponding to the

selected command.

NOTE: For details on drawing the desired shape of outline, refer to “

3-2-2 Selecting commands

for drawing the desired outlines

”.

2. In the design area, click to specify the start point of the outline (1 in the figure below),

and then continue clicking at the points that will define the path of the outline (2 through

6 in the figure below).

NOTE: When

Snap Setting

on the

View

drop-down-menu is active, the pointer snaps to the

specified target.

To delete the last point you have inputted, press the keyboard’s

Backspace or Space

key.

Repeat pressing the

Backspace

or Space key to delete more points.

To delete all points, press the keyboard’s

Esc

key.

3. After specifying the end point of the outline, right-click once to finish the outline.

The start point marker (“S”) and end point marker (“E”) for the outline appear.

NOTE: To close an outline connecting the end point to the start point, click

Close Outline

on the

Shape

drop-down menu or click the Close icon

in the toolbar before finishing the

outline.

4. Repeat steps 1 to 3 to draw more outlines.

The end point of the previous outline and the start point of the current outline are connected with

a feed or a stitch that is specified in Property on the View drop-down menu.

NOTE: To create another outline linked with the current outline, click

Continue

on the

Shape

drop-down menu or click the Continue icon

in the toolbar.

To draw an outline using the Input Outline (Stitch, Feed) dialog box:

Summary of Contents for PS-300B





































































































































































Search results

Summary of Contents for PS-300B

Reviews:

Related manuals for PS-300B

Brands by name

Popular brands

Brother PS-300B, Instruction Manual

Search results

Summary of Contents for PS-300B

Reviews:

Related manuals for PS-300B

Brands by name

Popular brands