134/164
To straighten a smooth punch point (Modify-Point-Cusp,
):
The
Cusp
command allows you to straighten a smooth punch point between two rounded paths
of an outline.
1. Using the
Select Punch Point
tool
, select the smooth punch point that you want to
straighten.
The selected punch point changes to a black circle.
NOTE: The
Cusp
command is available only when a smooth punch point of an outline is selected.
2. Do one of the following:
On the
Modify
drop-down menu, click
Point
. On the
Point
sub- menu, click
Cusp
.
Click the Cusp icon
in the toolbar.
Right-click to display the context menu, and then click
Cusp
.
The two rounded paths of outlines that meet at the smooth point are straightened out.