manualshive.com logo in svg

Brother PDS-5000, Service Manual

Share
Download
Brother PDS-5000 Service Manual Download Page 3

Confidential

TRADEMARKS

BROTHER is either a trademark or a registered trademark of Brother Industries, Ltd.

Microsoft, Windows, Windows Vista, Windows Server, Outlook and Internet Explorer are either 
registered trademarks or trademarks of Microsoft Corporation in the United States and/or other 
countries.

Apple, Macintosh, Mac OS and Safari are trademarks of Apple Inc., registered in the United States and 
other countries.

Nuance, the Nuance logo, PaperPort and ScanSoft are trademarks or registered trademarks of Nuance 
Communications, Inc. or its affiliates in the United States and/or other countries.

PowerPC is a registered trademark of IBM in the United States and/or other countries.

AOSS is a trademark of Buffalo Inc.

WPA, WPA2, Wi-Fi Protected Access and Wi-Fi Protected Setup are marks of the Wi-Fi Alliance.

Wi-Fi and Wi-Fi Alliance are registered marks of the Wi-Fi Alliance.

AMD is a trademark of Advanced Micro Devices, Inc.

Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.

Android is a trademark of Google Inc.

ISIS, Captiva and QuickScan are either registered trademarks or trademarks of EMC Corporation in the 
United States and/or other countries.

Intel is a trademark of Intel Corporation in the U.S. and/or other countries.

Adobe, Reader and Photoshop are either registered trademarks or trademarks of Adobe Systems 
Incorporated in the United States and/or other countries.

Each company whose software title is mentioned in this manual has a Software License Agreement 
specific to its proprietary programs.

Any trade names and product names of companies appearing on Brother products, related 
documents and any other materials are all trademarks or registered trademarks of those 
respective companies.

Copyright and License

© 2015 Brother Industries, Ltd. All rights reserved.

This product includes software developed by the following vendors:

© 1983-1998 PACIFIC SOFTWORKS, INC.

© 2008 Devicescape Software, Inc.

This product includes the “KASAGO TCP/IP” software developed by ZUKEN ELMIC,Inc.

Summary of Contents for PDS-5000





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands