Brother P-Touch PT-H300 User Manual Download

Page: 2 / 73

INTRODUCTION

Thank you for purchasing the P-touch labeler PT-H300/H300LI.

Your new P-touch labeler is an easy to operate, feature packed labeling system that

makes creating professional, high quality labels a breeze.

This manual contains various precautions and basic procedures for using this labeler.

Read this manual carefully before using and keep in a handy place for future reference.

Compilation and Publication Notice

Under the supervision of Brother Industries, Ltd., this manual has been compiled and

published, covering the latest product’s descriptions and specifications.

The contents of this manual and the specifications of this product are subject to change

without notice.

If new versions of the PT-H300/H300LI software become available, this manual may not

reflect the updated features. Therefore, you may find that the software and the contents in

this manual are different.

Any trade names and product names of companies appearing on Brother products, related

documents and any other materials are all trademarks or registered trademarks of those

respective companies.

Federal Communications Commission (FCC) Compliance Notice (For USA Only)

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Important

Changes or modifications not expressly approved by Brother Industries, Ltd. could void the

user's authority to operate the equipment.

ATTENTION: (For USA and Canada)

The Lithium Ion battery you have purchased is recyclable. At the end of

its useful life, under various state and local laws, it is illegal to dispose of

this battery into your municipal waste stream. Please call 1-800-8-

BATTERY

Summary of Contents for P-Touch PT-H300










































































Search results

Summary of Contents for P-Touch PT-H300

Reviews:

Related manuals for P-Touch PT-H300

Brands by name

Popular brands

Brother P-Touch PT-H300, User Manual

Search results

Summary of Contents for P-Touch PT-H300

Reviews:

Related manuals for P-Touch PT-H300

Brands by name

Popular brands