Brother P-Touch PT-H300 User Manual Download

Page: 9 / 73

INTRO

DUC

TION

Safety Precautions

To prevent injury and damage, important notes are explained using various symbols.
The symbols and their meanings are as follows:

The symbols used in this manual are as follows:

Safety Precautions

DANGER

Indicates an imminently hazardous situation which, if the product
is handled without following the warnings and instructions, will
result in death or serious injuries.

WARNING

Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injuries.

CAUTION

Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injuries.

Action NOT allowed

DO NOT disassemble the product.

DO NOT splash the product with
or immerse the product in water.

DO NOT touch a given portion of
the product.

Mandatory action

Unplugging is required

Indicates risk of fire under certain
circumstances.

Alerts to the possibility of electrical
shock

Summary of Contents for P-Touch PT-H300










































































Search results

Summary of Contents for P-Touch PT-H300

Reviews:

Related manuals for P-Touch PT-H300

Brands by name

Popular brands

Brother P-Touch PT-H300, User Manual

Search results

Summary of Contents for P-Touch PT-H300

Reviews:

Related manuals for P-Touch PT-H300

Brands by name

Popular brands