Brother P-Touch PT-H300 User Manual Download

Page: 66 / 73

TROUBLESHOOTING

Error Messages

Block Limit!
Max 5 Blocks

There are already five blocks of text. Limit the number of blocks to

five.

Length Limit!

The length of the label to be printed using the text entered is longer

than 39.37" (1 m). Edit the text so that the length of the label is less

than 39.37" (1 m).

Insert
0.70" Tape
Cassette!

An 0.70" (18 mm) tape cassette is not installed when an Auto-Format

for 0.70" (18 mm) tape is selected. Install an 0.70" (18 mm) tape

cassette.

Insert
18mm Tape
Cassette!
Insert
0.47" Tape
Cassette!

An 0.47" (12 mm) tape cassette is not installed when an Auto-Format

for 0.47" (12 mm) tape is selected. Install a 0.47" (12 mm) tape

cassette.

Insert
12mm Tape
Cassette!
Insert
0.35" Tape
Cassette!

An 0.35" (9 mm) tape cassette is not installed when an Auto-Format

for 0.35" (9 mm) tape is selected. Install a 0.35" (9 mm) tape

cassette.

Insert
9mm Tape
Cassette!
Insert
0.23" Tape
Cassette!

An 0.23" (6 mm) tape cassette is not installed when an Auto-Format

for 0.23" (6 mm) tape is selected. Install a 0.23" (6 mm) tape

cassette.

Insert
6mm Tape
Cassette!
Insert
0.13" Tape
Cassette!

An 0.13" (3.5 mm) tape cassette is not installed when an Auto-

Format for 0.13" (3.5 mm) tape is selected. Install an 0.13" (3.5 mm)

tape cassette.

Insert
3.5mm Tape
Cassette!
Too Much Text
For This Layout!

The maximum number of characters for the selected layout have

already been entered. Edit the text to use fewer characters or use a

different layout.

Text
Too Long!

The length of the label to be printed using the text entered is longer

than the length setting. Edit the text to fit within the set length or

change the length setting.

Message

Cause/Remedy

Summary of Contents for P-Touch PT-H300










































































Search results

Summary of Contents for P-Touch PT-H300

Reviews:

Related manuals for P-Touch PT-H300

Brands by name

Popular brands

Brother P-Touch PT-H300, User Manual

Search results

Summary of Contents for P-Touch PT-H300

Reviews:

Related manuals for P-Touch PT-H300

Brands by name

Popular brands