INTRODUCTION
10
General Precautions
Rechargeable Li-ion battery
• At the time of purchase, the rechargeable Li-ion battery is slightly charged so that the
operation of the labeler can be verified; however, the rechargeable Li-ion battery should
be fully charged with the AC adapter before the labeler is used.
• If the labeler will not be used for a long period of time, remove the rechargeable Li-ion
battery from the labeler, and then store it in a location where it is not exposed to static
electricity, high humidity, or high temperatures (temperatures between 59
°
F/15
°
C and
77
°
F/25
°
C and 40% to 60% humidity are recommended). In order to maintain the
efficiency and life of the Li-ion rechargeable battery, charge it at least every six months.
• If there is anything unusual about the Li-ion rechargeable battery the first time it is used,
for example, if it appears rusted or if it overheats, do not use the Li-ion rechargeable
battery. Contact the retail outlet where the printer was purchased.
Labeler
• DO NOT install P-touch labeler near any device that will cause electromagnetic
interference.P-touch labeler may malfunction if left near a television, radio, etc.
• DO NOT use the P-touch labeler in any way or for any purpose not described in this guide.
Doing so may result in injury or damage the machine.
• DO NOT put any foreign objects into the tape exit slot, AC adapter connector, or any other
part of the printer.
• DO NOT touch the print head (refer to page 6) with your fingers.Use the optional print head
cleaning cassette (TZe-CL4), the self-cleaning function of the labeler, or a soft wipe (e.g.
a cotton swab) when cleaning the print head (refer to “Cleaning the Unit” on page 57.).
• DO NOT clean any part of the machine with alcohol or other organic solvents. Only use a
soft, dry cloth.
• DO NOT place the P-touch labeler in direct sunlight, near heaters or other hot appliances,
or in any location exposed to extremely high or low temperatures, high humidity, or dust.
The standard operating temperature range of the P-touch labeler is 50
°
F to 95
°
F.
• DO NOT leave any rubber or vinyl, or products made of rubber or vinyl, on the printer for
an extended period of time, otherwise the printer may be stained.
• Depending on the environmental conditions and the applied settings, some characters or
symbols may be difficult to read.
• Use only Brother TZe tapes with P-touch labeler. Do not use tapes that do not have the
mark.
• DO NOT pull or apply pressure to the tape in the cassette. Otherwise the tape cassette or
labeler may be damaged.
• DO NOT try to print labels using an empty tape cassette or without a tape cassette in the
P-touch labeler. Doing so will damage the print head.
• DO NOT attempt to cut the tape while printing or feeding since this will damage the tape.
• Depending on the location, material, and environmental conditions, the label may unpeel
or become irremovable, and the color of the label may change or be transferred to other
objects.
General Precautions
Summary of Contents for P-Touch PT-H300
Page 72: ......
Page 73: ...Printed in China LAD356001 ...
