Brother MFC-9420CN Service Manual Download Page 313

Page: 313 / 428

Confidential

9-57

<Windows

95/98/Me and Windows NT

4.0 Peer-to-Peer print (NetBIOS)

troubleshooting>

If you are having trouble printing on a Windows

95/98/Me, Windows NT

4.0 or later Peer-to-Peer

network (NetBIOS), check the following:
1. Make sure that the Brother NetBIOS Port driver is correctly installed and configured according

to the Windows

95/98/Me or Windows NT

4.0 Peer-to-Peer (NetBIOS) chapters. You may

find that during the installation of the port driver, the screen that prompts you for a Port name is

not displayed. This happens on some Windows

95/98/Me and Windows NT

4.0 computers.

Press the ALT and TAB keys to make it appear.

2. Make sure that the print server is configured to be in the same workgroup or domain as the rest

of your computers. It may take several minutes for the print server to appear in the network

neighborhood.

<Windows

2000/XP IPP troubleshooting>

Want to use a different Port number other than 631.

If you are using Port 631 for IPP printing, you may find that your firewall may not let the print data

through. If this is the case, use a different port number (port 80), or configure your firewall to allow

Port 631 data through.
To send a print job using IPP to a machine using port 80 (the standard HTTP port) enter the

following when configuring your Windows

2000/XP system.

http://ip_address/ipp

Get More Info option in Windows

2000 not working

If you are using a URL of:
http://ip_address:631 or http://ip_address:631/ipp ,
the

Get More Info

option in Windows

2000 will not function. If you wish to use the

Get More

Info

option, use the following URL:

http://ip_address

<Web browser troubleshooting (TCP/IP)>

1. If you can not connect to the print server using your web browser it may be worth checking the

proxy settings of your browser. Look in the exceptions setting and if necessary, type in the IP

address of the print server. This will stop your PC from trying to connect to your ISP or proxy

server every time you wish to look at the printer server.

2. Make sure that you are using the proper web browser, we recommend Netscape Navigator

version 4.0 or later/ Microsoft Internet Explorer

version 5.0 or later.

Summary of Contents for MFC-9420CN













































































































































































































































































































































































































































Search results

Summary of Contents for MFC-9420CN

Reviews:

Brands by name

Popular brands

Brother MFC-9420CN, Service Manual

Search results

Summary of Contents for MFC-9420CN

Reviews:

Brands by name

Popular brands