manualshive.com logo in svg

Brother MFC-760, Service Manual

Share
Download
Brother MFC-760 Service Manual Download Page 393

W I N D O W S

®

  P R I N T I N G

14 - 6

Quality/Color Tab

The Quality/Color tab enables you to select the print quality, media, colors
(matched to PC monitor, custom colors, or mono), and document type.

Click the Quality/Color tab to display this screen:

           

Select the Apply button to apply your selected settings.

To return to the default settings, click the Default button, then click the
Apply button.

Quality

Select the print quality. The print quality and speed are related. Higher
quality takes a longer time to print.

Draft :

360 x 180 dpi. The fastest print mode (approximately two
to four times faster than normal mode) and gives lower
ink consumption. Use this mode to print large volume
documents or a document for proofing.

Normal :

360 x 360 dpi. Recommended mode for ordinary printouts.
Good print quality with comfortable printing speed.

Fine :

720 x 720 dpi. Better print quality than normal and faster
print speed than Super Fine.

Super Fine :

1440 x 720 dpi. Use this mode to print precise images
such as photographs. Since the print data is much larger
than normal mode, processing time, data transfer time,
and printing time will be longer.

Summary of Contents for MFC-760









































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands