Brother MFC-760 Service Manual Download Page 189

Page: 189 / 488

- 5

Error Code

(Hex)

Error factor

Check:

Head thermistor broken.

• Print head unit
• Carriage ASSY
• Main PCB

Head thermistor short-circuited.

The number of performed purge sequences has reached
the limit.

• Ink absorbers
• Main PCB

Abnormal carriage travel speed detected when the power
was applied.

• Encoder strip (Any

stains or scratches?
Hooked correctly?)

• Purge unit
• Main chassis
• Carriage ASSY
• Main PCB

Head rated voltage data stored in the EEPROM on the
head PCB is invalid.

(This code may appear only in the maintenance mode.)

• Print head unit
• Main PCB
• Power supply PCB

The purge cam HP switch does not come ON even after
the purge cam has been driven by the specified number of
pulses.

The purge cam HP switch does not go OFF even after the
purge cam has been driven by the specified number of
pulses.

At the time of purge operation, the carriage has not
stopped in the purge position.

The purge cam HP switch has come ON when the
carriage was in the wipe position.

When reset, the purge cam HP switch does not come ON
even after the purge cam has been driven by the specified
number of pulses.

When reset, the purge cam HP switch does not go OFF
even after the purge cam has been driven by the specified
number of pulses.

• Purge unit
• Main chassis
• Paper feed motor
• Main PCB

Summary of Contents for MFC-760









































































































































































































































































































































































































































































































Search results

Summary of Contents for MFC-760

Reviews:

Brands by name

Popular brands

Brother MFC-760, Service Manual

Search results

Summary of Contents for MFC-760

Reviews:

Brands by name

Popular brands