manualshive.com logo in svg

Brother MFC-760, Service Manual

Share
Download
Brother MFC-760 Service Manual Download Page 299

A S S E M B L Y   A N D   C O N N E C T I O N S

2 - 6

Loading Paper in the Multi-Purpose
Paper Cassette

Before you install paper, please read Paper, pages 2-3~4.

The paper cassette can hold up to 250 sheets of paper (20 lb).

1) Remove the paper cassette           

(lift up and pull out).

2) Remove the cassette cover.

3) Adjust the cassette to the letter (A4/LTR) or legal position for the size

of paper you are using. To adjust the cassette to legal size, press the
button on the left and pull out the front part of the cassette.

Button

Legal

Position

Letter

Position

4) Stack up to 250 sheets

Maximum
Height Line

Paper

Adjusters

of paper face down in
the cassette and slide
the width and length
paper adjusters to fit
around it.
Do not place paper
above the maximum
paper height line, or
paper may jam.

5) Replace the cassette cover.

Summary of Contents for MFC-760









































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands