manualshive.com logo in svg

Brother MFC-760, Service Manual

Share
Download
Brother MFC-760 Service Manual Download Page 380

S E T T I N G   U P   T H E   M F C   A N D   C O M P U T E R

12 - 7

4

After the install is finished, click “On-Line Documentation” to access
on-line documentation for Multi-Function Link

®

 Pro and PaperPort

®

. The

On-Line Documentation window will appear:

         

5

In the On-Line Documentation window, click on “Install Acrobat Reader”
and follow the prompts on the screen. You must install Acrobat Reader
before you can view on-line documentation. You can print the On-Line
Documentation by selecting Print from the File pull-down menu.

Helpful Hints for Windows

®

 3.1

x

■

The installer automatically updates your SYSTEM.INI Windows

®

 file by

adding DEVICE=bi-di.386 under the [386Enh] section. If any
bi-directional parallel communications device driver has previously been
installed, it will be deactivated by this new driver. If you want to use the
driver that was previously installed, you should first install this driver,
then reinstall your previous driver. However, reinstalling the previous
driver will make the MFC driver inactive.

■

The installer makes the installed printer driver the Windows

®

 default.

■

The installer automatically sets the printer port to
the parallel interface, LPT1 (for Windows

®

 3.1x) and BRMFC (for

Windows

®

 95/98) and BMFC (for Windows NT

®

 Workstation 4.0).

■

During this installation, changes have been made to the SYSTEM.INI
file. It is necessary to restart Windows

®

 so the changes and the installed

bi-directional parallel communications device driver can take effect.

Summary of Contents for MFC-760









































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands