Brother M1034D, Instructions Manual

Page: 49 / 65

48
12
Narrow Overlock Stitch/
Rolled Edge Stitch
The Narrow overlock/Rolled edge stitche is a deco-
rative finish for lightweight to midweight fabrics. It is
often used to complete the edge of a fabric. This
stitch is sewn by removing the left needle and using
the 3-thread overlock stitch.
Instructions for both Narrow overlock/Rolled
edge Stitches
(1) Remove the left needle (on Two-needle models).
(2) It is recommended that a #80 Nylon or Polyester
thread be used on the following fabric:
Georgette
Rayon
Linen/Light Cotton
Broad Cloth
(3) Thread the machine for a three thread overlock,
using the right needle.
(4) Remove the stitch finger.
1
Raise the presser foot lever.
2
Pull all threads toward the back of the ma-
chine.
3
Check to make sure that the thread is no
longer wrapped around the stitch finger.
4
Open the front cover.
5
Turn the hand wheel until the upperlooper is at
its lowest position.
Smal overlock/rullesøm
Denne søm bruges som en dekorativ afslutning i
tynde og middeltynde stoffer. Er ofte brugt til at gøre
stofhjørner fuldstændige. For at sy denne søm skal
du benytte 3-tråds overlock.
Instruktion i syning af smal overlock/rullesøm
(1) Fjern venstre nål (2-tråds modeller).
(2) Det anbefales at benytte #80 nylon eller polyester
tråd i følgende stoffer:
Georgette
Rayon
Linned/let bomuld
Klæde
(3) Tråd maskinen til 3-tråds overlock, benyt højre
nål.
(4) Fjern kædefingeren
1
Løft trykfodsarmen
2 Træk trådene ud på den anden side af
maskinen
3
Check at trådene ikke længere er viklet rundt
om kædefingeren
4
Åbn frontdæksel
5
Drej håndhjulet til overgriberen er i sin laveste
position