manualshive.com logo in svg

Brother HL- SERIES, Technical Reference Manual, Page: 75 / 392

Share
Download
Brother HL- SERIES Technical Reference Manual Download Page 75

Revision C 16/01/96

Chapter 2 "PCL" - 60

Unicode Symbol Index Character Complement bits

Bit Field

Designated Use

31
30

29

28

27

26

25

24

23

22

2,1,0

0 if font is compatible with 7-bit ASCII;  otherwise set to 1.
0 if font is compatible with ISO 8859/1 Latin 1 (West Europe)
character sets;  otherwise set to 1.
0 if font is compatible with ISO 8859/2 Latin 2 (East Europe) character
sets;  otherwise set to 1.
0 if font is compatible with Latin 5 (Turkish) character sets (e.g., ISO
8859/9 Latin 5,PC-Turkish);  otherwise set to 1.
0 if font is compatible with Desktop Publishing character sets (e.g.,
Windows 3.1 Latin 1, DeskTop, MC Text); otherwise set to 1.
0 if font is compatible with character sets requiring a wider
selection of accents (e.g., MC Text, ISo 8859/1 Latin 1);
otherwise set to 1.
0 if font is compatible with traditional PCL character sets (e.g.,
Roman-8, Legal, ISO 4 United Kingdom);  otherwise set to 1.
0 if font is compatible with the Macintosh character set (MS
Text);  otherwise set to 1.
0 if font is compatible with PostScript Standard Encoding (PS Text);
otherwise set to 1.
0 if font is compatible with Code Pages (e.g., PC-8, PC-850,
PC-Turk, etc.); otherwise set to 1.
110 if font is arranged in Unicode Symbol Index order.

• 

Checksum - This should be set to a value which, when added to the contents of the  64 bytes of this font
descriptor data produces a total of 0.

• 

Descriptor size - segmented font data.

MSB
15                                            8

                                    LSB
7                                       0

x

First segment, segment identifier

x + 2

First segment, Segment size

x + 4

First segment, Data segment

x + 4 + 1st

seg. size

Second segment,segment identifier,

Size, Data segment

  |

                                                  |

# - 6

Null segment identifier

# - 4

Null segment size

# - 2

Reserved

Checksum

This segment follows just after the font header for TrueType.  Each segment is divided into segment identifier,
segment size, and data segment parts.

Summary of Contents for HL- SERIES









































































































































































































































































































































































































Reviews:

No comments