Brother HL- SERIES Technical Reference Manual Download Page 196

Page: 196 / 392

Revision C 16/01/96

Chapter 4 "Diablo 630" - 17

Clear all horizontal and vertical tabs

Esc2

(27)(50)

<1Bh><32h>

This command clears all horizontal and vertical tab stops set with the Esc 1 and Esc – commands.

LPRINT CHR$(27); CHR$(50); 'Clear all tabs

5.4. Characters

Set proportional spacing

EscP (27)(80)

<1Bh><50h>

This command allows you to turn proportional spacing on. Subsequent text is printed proportionally

spaced.

If the current font can only be printed monospaced this command has no effect.

LPRINT CHR$(27); CHR$(80); 'Turn proportional spacing on

Cancel proportional spacing

EscQ (27)(81)

<1Bh><51h>

This command allows you to turn proportional spacing off. Subsequent text is printed monospaced.

LPRINT CHR$(27); CHR$(81); 'Turn proportional spacing off

Set bold print mode

EscO (27)(79)

<1Bh><4Fh>

This command selects bold characters. Subsequent text on the current line only is printed in bold.

Bold printed characters and shadow printed characters are the same.

You can use bold print mode in conjunction with underline and auto strike-out modes.

Esc &, Esc X and CR (the carriage return code) all cancel bold printing

LPRINT CHR$(27); CHR$(79); 'Enable bold printing

Set double-strike mode

EscF (27)(70)

<1Bh><46h>

This command is identical to the Set Bold Print Mode command.

LPRINT CHR$(27); CHR$(70); 'Enable bold printing

Summary of Contents for HL- SERIES






























































































































































































































































































































































































Search results

Summary of Contents for HL- SERIES

Reviews:

Brother HL- SERIES, Technical Reference Manual, Page: 196 / 392

Search results

Summary of Contents for HL- SERIES

Reviews: