manualshive.com logo in svg

Brother HL- SERIES, Technical Reference Manual, Page: 278 / 392

Share
Download
Brother HL- SERIES Technical Reference Manual Download Page 278

Revision C 16/01/96

Chapter 8 "HP-GL2"  12

• 

Type 0 scaling (anisotropic scaling, and the default) allows you to specify different sized x-axis and y-axis
units.  Hence the area specified by X

min

, 

 

X

max

, Y

min

, and Y

max 

will occupy the entire area defined by P1 and

P2.

P1 (0,0)

P2 (7,6)

• 

left and bottom settings have no effect in type 0 scaling.

• 

Type 1 scaling (isotropic scaling) forces x-axis and y-axis units to be the same size.  As a result the area
specified by X

min

, 

 

X

max

, Y

min

, and Y

max 

(the isotropic area) may not fit exactly into the rectangular area

defined by P1 and P2.

  

P1

(0,0)

(6,7)

P2

• 

With type 1 scaling you can specify the percentage of unused space that is to lie below,  or to the left of,  the
isotropic area.

• 

left specifies the percentage of unused space you want to lie to the left of the isotropic area,  and can be from
0 to 100.  If you do not specify the value for left,  it is automatically set to the default value = 50%.

• 

bottom specifies the percentage of unused space you want to lie below the isotropic area,  and can be from 0
to 100.  If you do not specify the value for bottom,  it is automatically set to the default value = 50%.

Summary of Contents for HL- SERIES









































































































































































































































































































































































































Reviews:

No comments