Brother HL- SERIES Technical Reference Manual Download Page 215

Page: 215 / 392

Revision C 16/01/96

Chapter 5 " EPSON FX-850 " - 16

Select n/216" line spacing

Esc3n

(27)(51)n

<1Bh><33h>n

This command sets the line spacing to n/216". All subsequent line feed operations will move

the print position n/216" down the page.

Since the printer’s resolution is 600 dots per inch the line spacing will not be exactly n/216".

n must be in the range 1 to 255.

LPRINT CHR$(27); CHR$(51); CHR$(25); 'Select line spacing of
25/216".

Perform n/216" line feed

EscJn

(27)(74)n

<1Bh><4Ah>n

This command performs a single line feed, moving the print position down the page by n/216".

This command does not perform a carriage return.

The current line spacing setting is not affected.

n must be in the range 0 to 255.

The actual vertical distance moved may not be exactly the distance you specify due to the

printer’s 600 dots per inch resolution.

LPRINT CHR$(27); CHR$(74); CHR$(54); '1/4" line feed

Perform n/216" reverse line feed

Escjn

(27)(106)n

<1Bh><6Ah>n

This command performs a single reverse line feed, moving the print position up the page by

n/216".

This command does not perform a carriage return.

The current line spacing setting is not affected.

n must be in the range 0 to 255.

The actual vertical distance moved may not be exactly the distance you specify due to the

printer’s 600 dots per inch resolution.

LPRINT CHR$(27); CHR$(106); CHR$(108); '1/2" line feed

Summary of Contents for HL- SERIES






























































































































































































































































































































































































Search results

Summary of Contents for HL- SERIES

Reviews:

Brother HL- SERIES, Technical Reference Manual, Page: 215 / 392

Search results

Summary of Contents for HL- SERIES

Reviews: