Brother HL- SERIES, Technical Reference Manual, Page: 361 / 392

Revision C 16/01/96
Chapter 9 "HP-GL" 34
SR - Set Relative Character Size
SR [ width, height ] [;]
width ; the width of printed characters expressed as a percentage of the x-component of the distance
between P1 and P2.
height ; the height of printed characters expressed as a percentage of the y-component of the distance
between P1 and P2.
•
Specifies the size of characters to be plotted.
•
Values for width and height are clamped real numbers.
•
When the parameter field is omitted, the default values are used (width: 0.7500%, height: 1.5000%).
10 ' *** SREX ***
20 LPRINT "IN;SP2;PA100,7000;LBDEFAULT SIZE";CHR$(3)
30 LPRINT "IP 2000,2000,6500,6500;PA100,6500;"
40 LPRINT "LBNEW P1 AND P2 CHANGE LABEL SIZE";CHR$(3);"SR5,5;"
50 LPRINT "PA100,6000;LBNEW SR INSTRUCTION";CHR$(13);CHR$(3);
60 LPRINT "LBCHANGE LABEL SIZE";CHR$(3);
<Sample 90>
SL - Character Slant
SL [ tan
φφ
] [;]
tan
φ
- tangent of character slant angle (
φ
)
•
Specifies the slant of characters to be plotted.
•
Value for tan
θ
is a clamped real number.
•
When the parameter field is omitted, the default value is used (0 degree character slant).
θ
10 '"*** SLEX ***
20 LPRINT "DF;SP1;SI1.3,1.3;PA100,6000;"
30 LPRINT "SL2;LBLASER";CHR$(3)
40 LPRINT "SL-2;PR3000,0;LBLASER";CHR$(3)
50 END
<Sample 91>