2-113
Confidential
■
Paper jam at the paper tray 2, 3, 4
<User Check>
- Check if the paper is loaded into the paper tray 2 correctly.
- Turn back the paper loaded in the paper tray 2 or change the orientation of the paper by
180°.
- Adjust the paper guide corresponding to the paper size.
- Check if too much paper is loaded in the tray.
- Check if the thickness of the paper is 60 to 105 g/m
2
.
- Fan the stack of paper well and reinsert the papers into the paper tray.
Step
Cause
Remedy
1
Foreign object around each
paper tray installed above the
target paper tray
Remove the foreign object.
2
Retard roller cover installation
failure
Re-assemble the retard roller cover.
3
Coming off of eject actuator of
each tray
Re-assemble the eject actuator of each
tray.
4
Paper feed motor harness
connection failure of each tray
Reconnect the paper feed motor harness
of each tray.
5
Paper feed sensor harness
connection failure of each tray
Reconnect the paper feed sensor harness
of each tray.
6
Paper feed sensor failure of each
tray
Replace each paper tray.
7
LT feed unit failure
Replace the LT feed unit.
8
Main PCB failure
Replace the main PCB ASSY.
Summary of Contents for HL-S7000DN Series
