manualshive.com logo in svg

Brother HL-7050 Series, Service Manual

Share
Download
Brother HL-7050 Series Service Manual Download Page 93

HL-7050 SERVICE MANUAL

2-63

6.  NETWORK BOARD OPERATION  (HL-7050N AND OPTION FOR HL-7050)

Installing the network board enables you to use the printer in the TCP/IP, IPX/SPX, AppleTalk,
DLC/LLC, Banyan VINES, DEC LAT and NetBEUI environments.  Also, useful utilities such as
BR-Admin32 and network printing software for the administrator are included.  For more
information about set up, see 

section 3. ‘INSTALL THE PRINTER’ in this chapter

.

6.1

Installing the Network Board

(1)  Turn off the printer power, and then unplug

the power cord.  Disconnect the interface
cable (printer cable) from the printer.

(2)  Open the side cover.

Fig. 2-53

(3)  Loosen the three screws, and then remove

the metal plate by lifting up slightly.

              

Fig. 2-54

(4)  Unscrew the two screws, and then remove

the network cover plate.

Fig. 2-55

Summary of Contents for HL-7050 Series







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands