manualshive.com logo in svg

Brother HL-7050 Series, Service Manual

Share
Download
Brother HL-7050 Series Service Manual Download Page 209

CHAPTER 5 PERIODIC MAINTENANCE

5-8

  3.2

Cleaning the Printer Interior

When replacing the toner cartridge with a new one, be sure to clean the scanner window.

1)  Turn off the power switch and unplug the power cord.

2)  Remove the toner cartridge.

3)  Wipe off toner and paper dust from the metal plate in the printer with a dry, soft cloth.

Fig. 5-11

4)  Wipe the scanner window with a dry, soft cloth.

Fig. 5-12

5)  Install the toner cartridge into the printer.

6)  Close the top cover, plug the power cord into the AC inlet, and then turn on the printer.

!

CAUTION:

•

 

Do not touch the scanner window with your fingers.

•

 

Do not wipe the scanner window with cleaning alcohol (isopropyl).

•

 

Be careful not to inhale the toner.

Metal plate

Summary of Contents for HL-7050 Series







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands