Brother HL-7050 Series, Service Manual

Page: 153 / 326

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
4-36
(26) Place the FU frame lower the correct way up. Remove the ground wire 2 from the plate
by pushing A at the bottom. Push up the two plates, release the two hooks from the
plates, and then remove the pressure roller 35 from the FU frame lower A.
Fig. 4-58
(27) Remove the two plates and the two bearings from the pressure roller 35.
(28) Remove the two P/R shaft bearing holders
to remove the P/R ball bearings from the P/R
arm AMs.
Fig. 4-59
FU frame lower
Hook
Pressure roller 35
Ground wire 2
A
P/R arm AM
P/R arm AM
P/R ball bearing
Pressure roller 35
Hook
P/R arm AM
P/R shaft bearing holder
P/R arm AM
P/R shaft bearing holder
P/R ball bearing