manualshive.com logo in svg

Brother HL-7050 Series, Service Manual

Share
Download
Brother HL-7050 Series Service Manual Download Page 85

HL-7050 SERVICE MANUAL

2-55

5.5.11 About emulation modes

This printer has the following emulation modes.

HP LaserJet Mode

The HP LaserJet mode (or HP mode) is the emulation mode in which this printer emulates the
Hewlett-Packard LaserJet laser printer.  Many software applications support this type of laser
printer.  Using this mode will allow your printer to operate at its optimum performance with
those applications.

BR-Script 3 Mode

BR-Script is an original page description language and a PostScript language emulation
interpreter.  This printer supports level 3.  The BR-Script interpreter of this printer enables full
and satisfactory control of text and graphics on pages.

See the following commercial manuals for more technical information about PostScript
commands.

•

 

Adobe Systems Incorporated.  

PostScript Language Reference Manual, 3rd Edition.

Menlo Park:  Addison-Wesley Publishing Company, Inc., 1999.

•

 

Adobe Systems Incorporated.  

PostScript Language Program Design.

  Menlo Park:

Addison-Wesley Publishing Company, Inc., 1988.

•

 

Adobe Systems Incorporated.  

PostScript Language Reference Manual.

  Menlo Park:

Addison-Wesley Publishing Company, Inc., 1985.

•

 

Adobe Systems Incorporated.  

PostScript Language Tutorial and Cookbook.

  Menlo Park:

Addison-Wesley Publishing Company, Inc., 1985.

•

 

Adobe Systems Incorporated.  

PostScript Language Reference Manual, third Edition.

Addison-Wesley Longman, Inc., 1999.

HP-GL Mode

The HP-GL mode is the emulation mode in which this printer emulates the Hewlett-Packard
plotter model HP-7475A.  Many graphics and CAD applications support this type of plotter.
Use this mode for optimum performance when printing from those types of applications.

EPSON FX-850 and IBM Proprinter XL Mode

The EPSON FX-850 and IBM Proprinter XL modes are the emulation modes that this printer
emulates to meet the industry-standard for dot matrix printers of their respective manufactures.
Some applications support these dot matrix printer emulations.  Use these emulation modes
for optimum performance when printing from those types of applications.

Summary of Contents for HL-7050 Series







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands