manualshive.com logo in svg

Brother HL-7050 Series, Service Manual

Share
Download
Brother HL-7050 Series Service Manual Download Page 16

CHAPTER 1 GENERAL

1-2

Popular Printer Emulation Support

The printer supports the following printer emulation modes;
HP LaserJet (PCL6), Epson FX-850, IBM Proprinter XL, HP-GL and PostScript

 

Level 3

language emulation (Brother BR-Script Level 3).

When you use DOS application software or Windows

 version 3.0 or earlier, you can use any

of these emulations to operate the printer. The printer also supports auto-emulation switching
between HP, Brother BR-Script 3, HP-GL and Epson or HP, BR-Script 3, HP-GL and IBM. If
you want to set the printer emulation, you can do it by operating the front panel.

High Resolution Control & Advanced Photoscale Technology

High Resolution Control (HRC) technology provides clear and crisp printouts. Use this function
to get smooth text print quality.

Advanced Photoscale Technology (APT) enables the printer to print graphics in 256
grayscales, producing nearly photographic quality. Use this function when you want to print
photographic images.

Environment-Friendly

<Economy Printing Mode>
This feature will cut your printing cost by saving toner. It is useful for obtaining draft copies for
proof-reading.

<Sleep Mode (Power Save Mode)>
Sleep mode automatically reduces power consumption when the printer is not in use for a
certain period of time. The printer consumes less than 16W when in sleep mode.

Bar Code Print

The printer can print the following 11 types of bar codes;

•

 

Code 39

•

 

US-PostNet

•

 

EAN-8

•

 

Code 128

•

 

ISBN

•

 

EAN-13

•

 

Interleaved 2 of 5

•

 

UPC-A

•

 

EAN-128

•

 

Codabar

•

 

UPC-E

 

Network Feature

The Brother network printer has a built in multi protocol network capability as standard.  This
allows multiple host computers to share the printer on a 10/100Mbit Ethernet network.  Any
users can print their jobs as if the printer was directly connected to their computer.  Users on
Windows

 95/98/Me, Windows

 NT/2000/XP, UNIX, Novell, Apple Macintosh, LAN server and

OS/2 Warp server computer simultaneously can access this printer. For further information,
see the Network User’s Guide supplied with the printer.

Summary of Contents for HL-7050 Series







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands