manualshive.com logo in svg

Brother HL-7050 Series, User Manual

Share
Download
Brother HL-7050 Series User Manual Download Page 86

CONTROL PANEL 3 - 2

HL7050_US_UG_FM5.5

Buttons 

You can control the basic printer operations and change various 
printer settings with seven buttons (Go, Job Cancel, Reprint, +, -, 
Set, Back).

Button

Operation

Go

Exit from the control panel menu, reprint 
settings and error messages.
Pause and continue printing.

Job Cancel

Stop and cancel the printing job in 
progress.  

Reprint

Select the number of extra copies (1-999). 

+

Move forward through menus.
Move forward through the options you can 
choose.  

-

Move backward through menus.
Move backward through the options you 
can choose.  

Set

Select the control panel menu.
Set the selected menus and settings.

Back

Go back one level in the menu.

Summary of Contents for HL-7050 Series






























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands